Accessories

Made for the Wreath Lock.

Two Wreath Lock creations that enhance the use of the Wreath Lock device: the adaptor and the Swag Stick. The adaptor provides a way to secure the traditionally “unhookable” items. The Swag Stick secures vertical swags, creates swags, and even makes tabletop centerpiece designs.

AdaptorSwag StickHow they go togetherWhich one
  1. 01Through the slot.One foot of the adaptor goes in the Swag Stick's top slot, from the front, and its leg follows through.
  2. 02The Wreath Lock, from behind.The hook comes up mouth first and rides the adaptor's legs, round both corners and down to the closed end, the same way it takes a wire frame.
  3. 03One unit.The stick rests against the hook. Over the door it goes, and it closes with the door.

Rendered from the CAD models of the three parts, seen from the door side. Nothing is lifted off from the front; the hook comes off from the inside, as always.

Adaptor

One piece of steel, folded once.

A laser-cut piece of steel formed with feet on each end. Created for a grapevine wreath, a thicker wire-framed wreath, and even the Swag Stick and Wreath Lock together, to create the product ecosystem. The feet are out of sight in use on the Wreath Lock hook. The adaptor provides security without taking away from the beauty of your decor piece.

Includedwith every Wreath Lock
1.25 inacross the feet
7/8 intall, the loop

See it hook a grapevine wreath on the home page

Swag Stick

Now you can secure a vertical swag.

Whether you create a swag on it or use it to secure an existing swag by zip-tying it to the spine, the Swag Stick is the ultimate device for securing this decor. Lay it flat after building a swag on it and it becomes a tabletop centerpiece. The creative possibilities are endless: a quality steel device, reused year after year, to create or secure swag wreaths.

20 × 2 inthe strip
10 pairsof ¼ in holes, 2 in apart
2 slotsone at each end, for the adaptor

Maria shows the Swag Stick in her quick tips

Which one?

AdaptorSwag Stick
ForFor grapevine or thicker wire framed wreaths. Works in combination with the Swag Stick and Wreath Lock hook.For creation of vertical swags or tabletop centerpieces. Can be attached to the spine of a vertical swag for use with the adaptor and Wreath Lock for securing.
Hangs byBeing placed through the grapevines on a wreath or through the sawtooth hanger on other decor.The adaptor through the slot on either end and being placed on the Wreath Lock hook.
Works withEvery Wreath Lock length.Every Wreath Lock length, with the adaptor.
Size1.25 in across, 7/8 in tall.20 in long, 2 in wide.
Comes withEvery Wreath Lock.Sold separately. Coming soon.

Dimensions from the parts' drawings. The Swag Stick is shown in its updated design, with a slot at each end.